# bunyan Changelog Known issues: - [issue #58] Can't install to a dir with spaces. This is [this node-gyp bug](https://github.com/TooTallNate/node-gyp/issues/65). ## not yet released (nothing yet) ## 2.0.2 (beta) - [issue #444] Fix the `bunyan` CLI to not duplicate the "HTTP/1.1 ..." status line when serializing a "res" field. ## 2.0.1 (beta) - [issue #504] **Backward incompatible change to the `bunyan` CLI:** The `bunyan` CLI no longer adds a `Host` header when rendering a `client_req` field in a log record. In 1.x it used to do this (using `client_req.address` and `client_req.port`), on the *guess* that Node.js' `http.ClientRequest` handling would add it. However, the guess can be wrong and misleading. It is better not to guess. ## 2.0.0 (beta) - [issue #499] Fix some `bunyan` CLI exit handling problems. ## 1.8.10 - Ensure that `bunyan` errors out if attempting to use `-p PID` and file args at the same time. ## 1.8.9 - [pull #409, issue #246] Revert a change added to the `bunyan` CLI version 1.0.1 where `SIGINT` was ignored, such that Ctrl+C could not be used to terminate bunyan. (By @zbjornson and @davepacheco.) - [pull #469] Fix a strict mode (`"use strict;"`) error in some versions of Safari. ## 1.8.8 - Fix breakage due to a silly last minute "fix 'make check'". ## 1.8.7 Note: *Bad release.* Use 1.8.8 or later. - [issue #484] Fix breakage due to #474 in previous release. ## 1.8.6 Note: *Bad release.* Use 1.8.7 or later. - [issue #474] Bunyan's `safeCycles` is too slow when logging large objects. ## 1.8.5 - [issue #401] Improved performance when using disabled log levels. ## 1.8.4 - [issue #454] Fix `src` usage with node v7. ## 1.8.3 - [issue #450] Fix `log.info(null)` crash that resulted from #426 in v1.8.2. ## 1.8.2 - [issue #449] Bump dtrace-provider dep to 0.7.0 to help avoid deprecation warnings with node v6 in some cases. - [issue #426] Ensure `log.info({err: err})` results in a "msg" value, just like `log.info(err)`. ## 1.8.1 - [pull #386] Fix bad bug in rotation that could cause a crash with error message "cannot start a rotation when already rotating" (by Frankie O'Rourke). The bug was introduced in 1.8.0. ## 1.8.0 Note: *Bad release.* An addition in this release broke 'rotating-file' usage. Use 1.8.1 or later. - [issue #370] Fix `bunyan -p ...` (i.e. DTrace integration) on node 4.x and 5.x. - [issue #329, pull #330] Update the 'rotating-file' stream to do a file rotation on initialization if the mtime on the file path indicates the last rotation time was missed -- i.e. if the app wasn't running at the time. (by Paul Milham.) ## 1.7.1 - [issue #332, pull #355] Ensure stream for type='stream' stream is a writable stream. (By Michael Nisi.) - [issue #344] Fix "rotating-file" Bunyan streams to not miss rotations when configured for a period greater than approximately 25 days. Before this there was an issue where periods greater than node.js's maximum `setTimeout` length would fail to rotate. (By Martijn Schrage.) - [issue #234, pull #345] Improve `bunyan` CLI rendering of "res" field HTTP responses to not show two blank lines for an empty body. (By Michael Nisi.) ## 1.7.0 - [pull #311, #302, #310] Improve the runtime environment detection to fix running under [NW.js](http://nwjs.io/). Contributions by Adam Lynch, Jeremy Ruppel, and Aleksey Timchenko. - [pull #318] Add `reemitErrorEvents` optional boolean for streams added to a Bunyan logger to control whether an "error" event on the stream will be re-emitted on the `Logger` instance. var log = bunyan.createLogger({ name: 'foo', streams: [ { type: 'raw', stream: new MyCustomStream(), reemitErrorEvents: true } ] }); Before this change, "error" events were re-emitted on [`file` streams](https://github.com/trentm/node-bunyan#stream-type-file) only. The new behaviour is as follows: - `reemitErrorEvents` not specified: `file` streams will re-emit error events on the Logger instance. - `reemitErrorEvents: true`: error events will be re-emitted on the Logger for any stream with a `.on()` function -- which includes file streams, process.stdout/stderr, and any object that inherits from EventEmitter. - `reemitErrorEvents: false`: error events will not be re-emitted for any streams. Dev Note: Bunyan `Logger` objects don't currently have a `.close()` method in which registered error event handlers can be *un*registered. That means that a (presumably rare) situation where code adds dozens of Bunyan Logger streams to, e.g. process.stdout, and with `reemitErrorEvents: true`, could result in leaking Logger objects. Original work for allowing "error" re-emitting on non-file streams is by Marc Udoff in pull #318. ## 1.6.0 - [pull #304, issue #245] Use [Moment.js][momentjs.com] library to handle `bunyan` CLI time formatting in some cases, especially to fix display of local time. It is now required for local time formatting (i.e. `bunyan -L` or `bunyan --time local`). (By David M. Lee.) - [pull #252] Fix errant `client_res={}` in `bunyan` CLI rendering, and avoid extra newlines in `client_req` rendering in some cases. (By Thomas Heymann.) - [pull #291, issue #303] Fix `LOG.child(...)` to *not* override the "hostname" field of the parent. A use case is when one manually sets "hostname" to something other than `os.hostname()`. (By github.com/Cactusbone.) - [issue #325] Allow one to set `level: 0` in `createLogger` to turn on logging for all levels. (Adapted from #336 by github.com/sometimesalready.) - Add guards (to `resolveLevel`) so that all "level" values are validated. Before this, a bogus level like "foo" or -12 or `['some', 'array']` would silently be accepted -- with undefined results. - Doc updates for #340 and #305. - Update `make test` to test against node 5, 4, 0.12 and 0.10. ## 1.5.1 - [issue #296] Fix `src: true`, which was broken in v1.5.0. ## 1.5.0 Note: *Bad release.* The addition of `'use strict';` broke Bunyan's `src: true` feature. Use 1.5.1 instead. - [pull #236, issue #231, issue #223] Fix strict mode in the browser. - [pull #282, issue #213] Fixes bunyan to work with webpack. By Denis Izmaylov. - [pull #294] Update to dtrace-provider 0.6 to fix with node 4.0 and io.js 3.0. - Dropped support for 0.8 (can't install deps easily anymore for running test suite). Bump to a recent iojs version for testing. ## 1.4.0 (Bumping minor ver b/c I'm wary of dtrace-provider changes. :) - [issue #258, pull #259] Update to dtrace-provider 0.5 to fix install and tests on recent io.js versions. - safe-json-stringify@1.0.3 changed output, breaking some tests. Fix those. ## 1.3.6 - [issue #244] Make `bunyan` defensive on `res.header=null`. ## 1.3.5 - [issue #233] Make `bunyan` defensive on res.header as a boolean. - [issue #242] Make `bunyan` defensive on err.stack not being a string. ## 1.3.4 - Allow `log.child(...)` to work even if the logger is a *sub-class* of Bunyan's Logger class. - [issue #219] Hide 'source-map-support' require from browserify. - [issue #218] Reset `haveNonRawStreams` on `.addStream`. ## 1.3.3 - [pull #127] Update to dtrace-provider 0.4.0, which gives io.js 1.x support for dtrace-y parts of Bunyan. ## 1.3.2 - [pull #182] Fallback to using the optional 'safe-json-stringify' module if `JSON.stringify` throws -- possibly with an enumerable property getter than throws. By Martin Gausby. ## 1.3.1 - Export `bunyan.RotatingFileStream` which is needed if one wants to customize it. E.g. see issue #194. - [pull #122] Source Map support for caller line position for [the "src" field](https://github.com/trentm/node-bunyan#src). This could be interesting for [CoffeeScript](http://coffeescript.org/documentation/docs/sourcemap.html) users of Bunyan. By Manuel Schneider. - [issue #164] Ensure a top-level `level` given in `bunyan.createLogger` is *used* for given `streams`. For example, ensure that the following results in the stream having a DEBUG level: var log = bunyan.createLogger({ name: 'foo', level: 'debug', streams: [ { path: '/var/tmp/foo.log' } ] }); This was broken in the 1.0.1 release. Between that release and 1.3.0 the "/var/tmp/foo.log" stream would be at the INFO level (Bunyan's default level). ## 1.3.0 - [issue #103] `bunyan -L` (or `bunyan --time local`) to show local time. Bunyan log records store `time` in UTC time. Sometimes it is convenient to display in local time. - [issue #205] Fix the "The Bunyan CLI crashed!" checking to properly warn of the common failure case when `-c CONDITION` is being used. ## 1.2.4 - [issue #210] Export `bunyan.nameFromLevel` and `bunyan.levelFromName`. It can be a pain for custom streams to have to reproduce that. - [issue #100] Gracefully handle the case of an unbound `Logger.{info,debug,...}` being used for logging, e.g.: myEmittingThing.on('data', log.info) Before this change, bunyan would throw. Now it emits a warning to stderr *once*, and then silently ignores those log attempts, e.g.: bunyan usage error: /Users/trentm/tm/node-bunyan/foo.js:12: attempt to log with an unbound log method: `this` is: { _events: { data: [Function] } } ## 1.2.3 - [issue #184] Fix log rotation for rotation periods > ~25 days. Before this change, a rotation period longer than this could hit [the maximum setTimeout delay in node.js](https://github.com/joyent/node/issues/8656). By Daniel Juhl. ## 1.2.2 - Drop the guard that a bunyan Logger level must be between TRACE (10) and FATAL (60), inclusive. This allows a trick of setting the level to `FATAL + 1` to turn logging off. While the standard named log levels are the golden path, then intention was not to get in the way of using other level numbers. ## 1.2.1 - [issue #178, #181] Get at least dtrace-provider 0.3.1 for optionalDependencies to get a fix for install with decoupled npm (e.g. with homebrew's node and npm). ## 1.2.0 - [issue #157] Restore dtrace-provider as a dependency (in "optionalDependencies"). Dtrace-provider version 0.3.0 add build sugar that should eliminate the problems from older versions: The build is not attempted on Linux and Windows. The build spew is *not* emitted by default (use `V=1 npm install` to see it); instead a short warning is emitted if the build fails. Also, importantly, the new dtrace-provider fixes working with node v0.11/0.12. ## 1.1.3 - [issue #165] Include extra `err` fields in `bunyan` CLI output. Before this change only the fields part of the typical node.js error stack (err.stack, err.message, err.name) would be emitted, even though the Bunyan *library* would typically include err.code and err.signal in the raw JSON log record. ## 1.1.2 - Fix a breakage in `log.info(err)` on a logger with no serializers. ## 1.1.1 Note: *Bad release.* It breaks `log.info(err)` on a logger with no serializers. Use version 1.1.2. - [pull #168] Fix handling of `log.info(err)` to use the `log` Logger's `err` serializer if it has one, instead of always using the core Bunyan err serializer. (By Mihai Tomescu.) ## 1.1.0 - [issue #162] Preliminary support for [browserify](http://browserify.org/). See [the section in the README](../README.md#browserify). ## 1.0.1 - [issues #105, #138, #151] Export `.addStream(...)` and `.addSerializers(...)` to be able to add them after Logger creation. Thanks @andreineculau! - [issue #159] Fix bad handling in construtor guard intending to allow creation without "new": `var log = Logger(...)`. Thanks @rmg! - [issue #156] Smaller install size via .npmignore file. - [issue #126, #161] Ignore SIGINT (Ctrl+C) when processing stdin. `...| bunyan` should expect the preceding process in the pipeline to handle SIGINT. While it is doing so, `bunyan` should continue to process any remaining output. Thanks @timborodin and @jnordberg! - [issue #160] Stop using ANSI 'grey' in `bunyan` CLI output, because of the problems that causes with Solarized Dark themes (see ). ## 1.0.0 - [issue #87] **Backward incompatible change to `-c CODE`** improving performance by over 10x (good!), with a backward incompatible change to semantics (unfortunate), and adding some sugar (good!). The `-c CODE` implementation was changed to use a JS function for processing rather than `vm.runInNewContext`. The latter was specatularly slow, so won't be missed. Unfortunately this does mean a few semantic differences in the `CODE`, the most noticeable of which is that **`this` is required to access the object fields:** # Bad. Works with bunyan 0.x but not 1.x. $ bunyan -c 'pid === 123' foo.log ... # Good. Works with all versions of bunyan $ bunyan -c 'this.pid === 123' foo.log ... The old behaviour of `-c` can be restored with the `BUNYAN_EXEC=vm` environment variable: $ BUNYAN_EXEC=vm bunyan -c 'pid === 123' foo.log ... Some sugar was also added: the TRACE, DEBUG, ... constants are defined, so one can: $ bunyan -c 'this.level >= ERROR && this.component === "http"' foo.log ... And example of the speed improvement on a 10 MiB log example: $ time BUNYAN_EXEC=vm bunyan -c 'this.level === ERROR' big.log | cat >slow real 0m6.349s user 0m6.292s sys 0m0.110s $ time bunyan -c 'this.level === ERROR' big.log | cat >fast real 0m0.333s user 0m0.303s sys 0m0.028s The change was courtesy Patrick Mooney (https://github.com/pfmooney). Thanks! - Add `bunyan -0 ...` shortcut for `bunyan -o bunyan ...`. - [issue #135] **Backward incompatible.** Drop dtrace-provider even from `optionalDependencies`. Dtrace-provider has proven a consistent barrier to installing bunyan, because it is a binary dep. Even as an *optional* dep it still caused confusion and install noise. Users of Bunyan on dtrace-y platforms (SmartOS, Mac, Illumos, Solaris) will need to manually `npm install dtrace-provider` themselves to get [Bunyan's dtrace support](https://github.com/trentm/node-bunyan#runtime-log-snooping-via-dtrace) to work. If not installed, bunyan should stub it out properly. ## 0.23.1 - [pull #125, pull #97, issue #73] Unref rotating-file timeout which was preventing processes from exiting (by https://github.com/chakrit and https://github.com/glenn-murray-bse). Note: this only fixes the issue for node 0.10 and above. ## 0.23.0 - [issue #139] Fix `bunyan` crash on a log record with `res.header` that is an object. A side effect of this improvement is that a record with `res.statusCode` but no header info will render a response block, for example: [2012-08-08T10:25:47.637Z] INFO: my-service/12859 on my-host: some message (...) ... -- HTTP/1.1 200 OK -- ... - [pull #42] Fix `bunyan` crash on a log record with `req.headers` that is a *string* (by https://github.com/aexmachina). - Drop node 0.6 support. I can't effectively `npm install` with a node 0.6 anymore. - [issue #85] Ensure logging a non-object/non-string doesn't throw (by https://github.com/mhart). This changes fixes: log.info() # TypeError: Object.keys called on non-object log.info() # "msg":"" (instead of wanted "msg":"[Function]") log.info() # "msg":"" (instead of wanted "msg":util.format()) ## 0.22.3 - Republish the same code to npm. ## 0.22.2 Note: Bad release. The published package in the npm registry got corrupted. Use 0.22.3 or later. - [issue #131] Allow `log.info()` and, most importantly, don't crash on that. - Update 'mv' optional dep to latest. ## 0.22.1 - [issue #111] Fix a crash when attempting to use `bunyan -p` on a platform without dtrace. - [issue #101] Fix a crash in `bunyan` rendering a record with unexpected "res.headers". ## 0.22.0 - [issue #104] `log.reopenFileStreams()` convenience method to be used with external log rotation. ## 0.21.4 - [issue #96] Fix `bunyan` to default to paging (with `less`) by default in node 0.10.0. The intention has always been to default to paging for node >=0.8. ## 0.21.3 - [issue #90] Fix `bunyan -p '*'` breakage in version 0.21.2. ## 0.21.2 **Note: Bad release. The switchrate change below broke `bunyan -p '*'` usage (see issue #90). Use 0.21.3 or later.** - [issue #88] Should be able to efficiently combine "-l" with "-p *". - Avoid DTrace buffer filling up, e.g. like this: $ bunyan -p 42241 > /tmp/all.log dtrace: error on enabled probe ID 3 (ID 75795: bunyan42241:mod-87ea640:log-trace:log-trace): out of scratch space in action #1 at DIF offset 12 dtrace: error on enabled probe ID 3 (ID 75795: bunyan42241:mod-87ea640:log-trace:log-trace): out of scratch space in action #1 at DIF offset 12 dtrace: 138 drops on CPU 4 ... From Bryan: "the DTrace buffer is filling up because the string size is so large... by increasing the switchrate, you're increasing the rate at which that buffer is emptied." ## 0.21.1 - [pull #83] Support rendering 'client_res' key in bunyan CLI (by github.com/mcavage). ## 0.21.0 - 'make check' clean, 4-space indenting. No functional change here, just lots of code change. - [issue #80, #82] Drop assert that broke using 'rotating-file' with a default `period` (by github.com/ricardograca). ## 0.20.0 - [Slight backward incompatibility] Fix serializer bug introduced in 0.18.3 (see below) to only apply serializers to log records when appropriate. This also makes a semantic change to custom serializers. Before this change a serializer function was called for a log record key when that value was truth-y. The semantic change is to call the serializer function as long as the value is not `undefined`. That means that a serializer function should handle falsey values such as `false` and `null`. - Update to latest 'mv' dep (required for rotating-file support) to support node v0.10.0. ## 0.19.0 **WARNING**: This release includes a bug introduced in bunyan 0.18.3 (see below). Please upgrade to bunyan 0.20.0. - [Slight backward incompatibility] Change the default error serialization (a.k.a. `bunyan.stdSerializers.err`) to *not* serialize all additional attributes of the given error object. This is an open door to unsafe logging and logging should always be safe. With this change, error serialization will log these attributes: message, name, stack, code, signal. The latter two are added because some core node APIs include those fields (e.g. `child_process.exec`). Concrete examples where this has hurt have been the "domain" change necessitating 0.18.3 and a case where [node-restify](https://github.com/mcavage/node-restify) uses an error object as the response object. When logging the `err` and `res` in the same log statement (common for restify audit logging), the `res.body` would be JSON stringified as '[Circular]' as it had already been emitted for the `err` key. This results in a WTF with the bunyan CLI because the `err.body` is not rendered. If you need the old behaviour back you will need to do this: var bunyan = require('bunyan'); var errSkips = { // Skip domain keys. `domain` especially can have huge objects that can // OOM your app when trying to JSON.stringify. domain: true, domain_emitter: true, domain_bound: true, domain_thrown: true }; bunyan.stdSerializers.err = function err(err) { if (!err || !err.stack) return err; var obj = { message: err.message, name: err.name, stack: getFullErrorStack(err) } Object.keys(err).forEach(function (k) { if (err[k] !== undefined && !errSkips[k]) { obj[k] = err[k]; } }); return obj; }; - "long" and "bunyan" output formats for the CLI. `bunyan -o long` is the default format, the same as before, just called "long" now instead of the cheesy "paul" name. The "bunyan" output format is the same as "json-0", just with a more convenient name. ## 0.18.3 **WARNING**: This release introduced a bug such that all serializers are applied to all log records even if the log record did not contain the key for that serializer. If a logger serializer function does not handle being given `undefined`, then you'll get warnings like this on stderr: bunyan: ERROR: This should never happen. This is a bug in or in this application. Exception from "foo" Logger serializer: Error: ... at Object.bunyan.createLogger.serializers.foo (.../myapp.js:20:15) at Logger._applySerializers (.../lib/bunyan.js:644:46) at Array.forEach (native) at Logger._applySerializers (.../lib/bunyan.js:640:33) ... and the following junk in written log records: "foo":"(Error in Bunyan log "foo" serializer broke field. See stderr for details.)" Please upgrade to bunyan 0.20.0. - Change the `bunyan.stdSerializers.err` serializer for errors to *exclude* [the "domain*" keys](http://nodejs.org/docs/latest/api/all.html#all_additions_to_error_objects). `err.domain` will include its assigned members which can arbitrarily large objects that are not intended for logging. - Make the "dtrace-provider" dependency optional. I hate to do this, but installing bunyan on Windows is made very difficult with this as a required dep. Even though "dtrace-provider" stubs out for non-dtrace-y platforms, without a compiler and Python around, node-gyp just falls over. ## 0.18.2 - [pull #67] Remove debugging prints in rotating-file support. (by github.com/chad3814). - Update to dtrace-provider@0.2.7. ## 0.18.1 - Get the `bunyan` CLI to **not** automatically page (i.e. pipe to `less`) if stdin isn't a TTY, or if following dtrace probe output (via `-p PID`), or if not given log file arguments. ## 0.18.0 - Automatic paging support in the `bunyan` CLI (similar to `git log` et al). IOW, `bunyan` will open your pager (by default `less`) and pipe rendered log output through it. A main benefit of this is getting colored logs with a pager without the pain. Before you had to explicit use `--color` to tell bunyan to color output when the output was not a TTY: bunyan foo.log --color | less -R # before bunyan foo.log # now Disable with the `--no-pager` option or the `BUNYAN_NO_PAGER=1` environment variable. Limitations: Only supported for node >=0.8. Windows is not supported (at least not yet). - Switch test suite to nodeunit (still using a node-tap'ish API via a helper). ## 0.17.0 - [issue #33] Log rotation support: var bunyan = require('bunyan'); var log = bunyan.createLogger({ name: 'myapp', streams: [{ type: 'rotating-file', path: '/var/log/myapp.log', count: 7, period: 'daily' }] }); - Tweak to CLI default pretty output: don't special case "latency" field. The special casing was perhaps nice, but less self-explanatory. Before: [2012-12-27T21:17:38.218Z] INFO: audit/45769 on myserver: handled: 200 (15ms, audit=true, bar=baz) GET /foo ... After: [2012-12-27T21:17:38.218Z] INFO: audit/45769 on myserver: handled: 200 (audit=true, bar=baz, latency=15) GET /foo ... - *Exit* CLI on EPIPE, otherwise we sit there useless processing a huge log file with, e.g. `bunyan huge.log | head`. ## 0.16.8 - Guards on `-c CONDITION` usage to attempt to be more user friendly. Bogus JS code will result in this: $ bunyan portal.log -c 'this.req.username==boo@foo' bunyan: error: illegal CONDITION code: SyntaxError: Unexpected token ILLEGAL CONDITION script: Object.prototype.TRACE = 10; Object.prototype.DEBUG = 20; Object.prototype.INFO = 30; Object.prototype.WARN = 40; Object.prototype.ERROR = 50; Object.prototype.FATAL = 60; this.req.username==boo@foo Error: SyntaxError: Unexpected token ILLEGAL at new Script (vm.js:32:12) at Function.Script.createScript (vm.js:48:10) at parseArgv (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:465:27) at main (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:1252:16) at Object. (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:1330:3) at Module._compile (module.js:449:26) at Object.Module._extensions..js (module.js:467:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) at Module.runMain (module.js:492:10) And all CONDITION scripts will be run against a minimal valid Bunyan log record to ensure they properly guard against undefined values (at least as much as can reasonably be checked). For example: $ bunyan portal.log -c 'this.req.username=="bob"' bunyan: error: CONDITION code cannot safely filter a minimal Bunyan log record CONDITION script: Object.prototype.TRACE = 10; Object.prototype.DEBUG = 20; Object.prototype.INFO = 30; Object.prototype.WARN = 40; Object.prototype.ERROR = 50; Object.prototype.FATAL = 60; this.req.username=="bob" Minimal Bunyan log record: { "v": 0, "level": 30, "name": "name", "hostname": "hostname", "pid": 123, "time": 1355514346206, "msg": "msg" } Filter error: TypeError: Cannot read property 'username' of undefined at bunyan-condition-0:7:9 at Script.Object.keys.forEach.(anonymous function) [as runInNewContext] (vm.js:41:22) at parseArgv (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:477:18) at main (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:1252:16) at Object. (/Users/trentm/tm/node-bunyan-0.x/bin/bunyan:1330:3) at Module._compile (module.js:449:26) at Object.Module._extensions..js (module.js:467:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) at Module.runMain (module.js:492:10) A proper way to do that condition would be: $ bunyan portal.log -c 'this.req && this.req.username=="bob"' ## 0.16.7 - [issue #59] Clear a possibly interrupted ANSI color code on signal termination. ## 0.16.6 - [issue #56] Support `bunyan -p NAME` to dtrace all PIDs matching 'NAME' in their command and args (using `ps -A -o pid,command | grep NAME` or, on SunOS `pgrep -lf NAME`). E.g.: bunyan -p myappname This is useful for usage of node's [cluster module](http://nodejs.org/docs/latest/api/all.html#all_cluster) where you'll have multiple worker processes. ## 0.16.5 - Allow `bunyan -p '*'` to capture bunyan dtrace probes from **all** processes. - issue #55: Add support for `BUNYAN_NO_COLOR` environment variable to turn off all output coloring. This is still overridden by the `--color` and `--no-color` options. ## 0.16.4 - issue #54: Ensure (again, see 0.16.2) that stderr from the dtrace child process (when using `bunyan -p PID`) gets through. There had been a race between exiting bunyan and the flushing of the dtrace process' stderr. ## 0.16.3 - Drop 'trentm-dtrace-provider' fork dep now that has been resolved. Back to dtrace-provider. ## 0.16.2 - Ensure that stderr from the dtrace child process (when using `bunyan -p PID`) gets through. The `pipe` usage wasn't working on SmartOS. This is important to show the user if they need to 'sudo'. ## 0.16.1 - Ensure that a possible dtrace child process (with using `bunyan -p PID`) is terminated on signal termination of the bunyan CLI (at least for SIGINT, SIGQUIT, SIGTERM, SIGHUP). ## 0.16.0 - Add `bunyan -p PID` support. This is a convenience wrapper that effectively calls: dtrace -x strsize=4k -qn 'bunyan$PID:::log-*{printf("%s", copyinstr(arg0))}' | bunyan ## 0.15.0 - issue #48: Dtrace support! The elevator pitch is you can watch all logging from all Bunyan-using process with something like this: dtrace -x strsize=4k -qn 'bunyan*:::log-*{printf("%d: %s: %s", pid, probefunc, copyinstr(arg0))}' And this can include log levels *below* what the service is actually configured to log. E.g. if the service is only logging at INFO level and you need to see DEBUG log messages, with this you can. Obviously this only works on dtrace-y platforms: Illumos derivatives of SunOS (e.g. SmartOS, OmniOS), Mac, FreeBSD. Or get the bunyan CLI to render logs nicely: dtrace -x strsize=4k -qn 'bunyan*:::log-*{printf("%s", copyinstr(arg0))}' | bunyan See for details. By Bryan Cantrill. ## 0.14.6 - Export `bunyan.safeCycles()`. This may be useful for custom `type == "raw"` streams that may do JSON stringification of log records themselves. Usage: var str = JSON.stringify(rec, bunyan.safeCycles()); - [issue #49] Allow a `log.child()` to specify the level of inherited streams. For example: # Before var childLog = log.child({...}); childLog.level('debug'); # After var childLog = log.child({..., level: 'debug'}); - Improve the Bunyan CLI crash message to make it easier to provide relevant details in a bug report. ## 0.14.5 - Fix a bug in the long-stack-trace error serialization added in 0.14.4. The symptom: bunyan@0.14.4: .../node_modules/bunyan/lib/bunyan.js:1002 var ret = ex.stack || ex.toString(); ^ TypeError: Cannot read property 'stack' of undefined at getFullErrorStack (.../node_modules/bunyan/lib/bunyan.js:1002:15) ... ## 0.14.4 - **Bad release. Use 0.14.5 instead.** - Improve error serialization to walk the chain of `.cause()` errors from the likes of `WError` or `VError` error classes from [verror](https://github.com/davepacheco/node-verror) and [restify v2.0](https://github.com/mcavage/node-restify). Example: [2012-10-11T00:30:21.871Z] ERROR: imgapi/99612 on 0525989e-2086-4270-b960-41dd661ebd7d: my-message ValidationFailedError: my-message; caused by TypeError: cause-error-message at Server.apiPing (/opt/smartdc/imgapi/lib/app.js:45:23) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.setupReq (/opt/smartdc/imgapi/lib/app.js:178:9) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.parseBody (/opt/smartdc/imgapi/node_modules/restify/lib/plugins/body_parser.js:15:33) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.parseQueryString (/opt/smartdc/imgapi/node_modules/restify/lib/plugins/query.js:40:25) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server._run (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:579:17) at Server._handle.log.trace.req (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:480:38) Caused by: TypeError: cause-error-message at Server.apiPing (/opt/smartdc/imgapi/lib/app.js:40:25) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.setupReq (/opt/smartdc/imgapi/lib/app.js:178:9) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.parseBody (/opt/smartdc/imgapi/node_modules/restify/lib/plugins/body_parser.js:15:33) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server.parseQueryString (/opt/smartdc/imgapi/node_modules/restify/lib/plugins/query.js:40:25) at next (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:550:50) at Server._run (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:579:17) at Server._handle.log.trace.req (/opt/smartdc/imgapi/node_modules/restify/lib/server.js:480:38) ## 0.14.2 - [issue #45] Fix bunyan CLI (default output mode) to not crash on a 'res' field that isn't a response object, but a string. ## 0.14.1 - [issue #44] Fix the default `bunyan` CLI output of a `res.body` that is an object instead of a string. See issue#38 for the same with `req.body`. ## 0.14.0 - [pull #41] Safe `JSON.stringify`ing of emitted log records to avoid blowing up on circular objects (by Isaac Schlueter). ## 0.13.5 - [issue #39] Fix a bug with `client_req` handling in the default output of the `bunyan` CLI. ## 0.13.4 - [issue #38] Fix the default `bunyan` CLI output of a `req.body` that is an object instead of a string. ## 0.13.3 - Export `bunyan.resolveLevel(NAME-OR-NUM)` to resolve a level name or number to its log level number value: > bunyan.resolveLevel('INFO') 30 > bunyan.resolveLevel('debug') 20 A side-effect of this change is that the uppercase level name is now allowed in the logger constructor. ## 0.13.2 - [issue #35] Ensure that an accidental `log.info(BUFFER)`, where BUFFER is a node.js Buffer object, doesn't blow up. ## 0.13.1 - [issue #34] Ensure `req.body`, `res.body` and other request/response fields are emitted by the `bunyan` CLI (mostly by Rob Gulewich). ## 0.13.0 - [issue #31] Re-instate defines for the (uppercase) log level names (TRACE, DEBUG, etc.) in `bunyan -c "..."` filtering condition code. E.g.: $ ... | bunyan -c 'level >= ERROR' ## 0.12.0 - [pull #32] `bunyan -o short` for more concise output (by Dave Pacheco). E.g.: 22:56:52.856Z INFO myservice: My message instead of: [2012-02-08T22:56:52.856Z] INFO: myservice/123 on example.com: My message ## 0.11.3 - Add '--strict' option to `bunyan` CLI to suppress all but legal Bunyan JSON log lines. By default non-JSON, and non-Bunyan lines are passed through. ## 0.11.2 - [issue #30] Robust handling of 'req' field without a 'headers' subfield in `bunyan` CLI. - [issue #31] Pull the TRACE, DEBUG, et al defines from `bunyan -c "..."` filtering code. This was added in v0.11.1, but has a significant adverse affect. ## 0.11.1 - **Bad release. The TRACE et al names are bleeding into the log records when using '-c'.** - Add defines for the (uppercase) log level names (TRACE, DEBUG, etc.) in `bunyan -c "..."` filtering condition code. E.g.: $ ... | bunyan -c 'level >= ERROR' ## 0.11.0 - [pull #29] Add -l/--level for level filtering, and -c/--condition for arbitrary conditional filtering (by github.com/isaacs): $ ... | bunyan -l error # filter out log records below error $ ... | bunyan -l 50 # numeric value works too $ ... | bunyan -c 'level===50' # equiv with -c filtering $ ... | bunyan -c 'pid===123' # filter on any field $ ... | bunyan -c 'pid===123' -c '_audit' # multiple filters ## 0.10.0 - [pull #24] Support for gzip'ed log files in the bunyan CLI (by github.com/mhart): $ bunyan foo.log.gz ... ## 0.9.0 - [pull #16] Bullet proof the `bunyan.stdSerializers` (by github.com/rlidwka). - [pull #15] The `bunyan` CLI will now chronologically merge multiple log streams when it is given multiple file arguments. (by github.com/davepacheco) $ bunyan foo.log bar.log ... merged log records ... - [pull #15] A new `bunyan.RingBuffer` stream class that is useful for keeping the last N log messages in memory. This can be a fast way to keep recent, and thus hopefully relevant, log messages. (by @dapsays, github.com/davepacheco) Potential uses: Live debugging if a running process could inspect those messages. One could dump recent log messages at a finer log level than is typically logged on [`uncaughtException`](http://nodejs.org/docs/latest/api/all.html#all_event_uncaughtexception). var ringbuffer = new bunyan.RingBuffer({ limit: 100 }); var log = new bunyan({ name: 'foo', streams: [{ type: 'raw', stream: ringbuffer, level: 'debug' }] }); log.info('hello world'); console.log(ringbuffer.records); - Add support for "raw" streams. This is a logging stream that is given raw log record objects instead of a JSON-stringified string. function Collector() { this.records = []; } Collector.prototype.write = function (rec) { this.records.push(rec); } var log = new Logger({ name: 'mylog', streams: [{ type: 'raw', stream: new Collector() }] }); See "examples/raw-stream.js". I expect raw streams to be useful for piping Bunyan logging to separate services (e.g. , ) or to separate in-process handling. - Add test/corpus/*.log files (accidentally excluded) so the test suite actually works(!). ## 0.8.0 - [pull #21] Bunyan loggers now re-emit `fs.createWriteStream` error events. By github.com/EvanOxfeld. See "examples/handle-fs-error.js" and "test/error-event.js" for details. var log = new Logger({name: 'mylog', streams: [{path: FILENAME}]}); log.on('error', function (err, stream) { // Handle error writing to or creating FILENAME. }); - jsstyle'ing (via `make check`) ## 0.7.0 - [issue #12] Add `bunyan.createLogger(OPTIONS)` form, as is more typical in node.js APIs. This'll eventually become the preferred form. ## 0.6.9 - Change `bunyan` CLI default output to color "src" info red. Before the "src" information was uncolored. The "src" info is the filename, line number and function name resulting from using `src: true` in `Logger` creation. I.e., the `(/Users/trentm/tm/node-bunyan/examples/hi.js:10)` in: [2012-04-10T22:28:58.237Z] INFO: myapp/39339 on banana.local (/Users/trentm/tm/node-bunyan/examples/hi.js:10): hi - Tweak `bunyan` CLI default output to still show an "err" field if it doesn't have a "stack" attribute. ## 0.6.8 - Fix bad bug in `log.child({...}, true);` where the added child fields **would be added to the parent's fields**. This bug only existed for the "fast child" path (that second `true` argument). A side-effect of fixing this is that the "fast child" path is only 5 times as fast as the regular `log.child`, instead of 10 times faster. ## 0.6.7 - [issue #6] Fix bleeding 'type' var to global namespace. (Thanks Mike!) ## 0.6.6 - Add support to the `bunyan` CLI taking log file path args, `bunyan foo.log`, in addition to the usual `cat foo.log | bunyan`. - Improve reliability of the default output formatting of the `bunyan` CLI. Before it could blow up processing log records missing some expected fields. ## 0.6.5 - ANSI coloring output from `bunyan` CLI tool (for the default output mode/style). Also add the '--color' option to force coloring if the output stream is not a TTY, e.g. `cat my.log | bunyan --color | less -R`. Use `--no-color` to disable coloring, e.g. if your terminal doesn't support ANSI codes. - Add 'level' field to log record before custom fields for that record. This just means that the raw record JSON will show the 'level' field earlier, which is a bit nicer for raw reading. ## 0.6.4 - [issue #5] Fix `log.info() -> boolean` to work properly. Previous all were returning false. Ditto all trace/debug/.../fatal methods. ## 0.6.3 - Allow an optional `msg` and arguments to the `log.info( err)` logging form. For example, before: log.debug(my_error_instance) // good log.debug(my_error_instance, "boom!") // wasn't allowed Now the latter is allowed if you want to expliciting set the log msg. Of course this applies to all the `log.{trace|debug|info...}()` methods. - `bunyan` cli output: clarify extra fields with quoting if empty or have spaces. E.g. 'cmd' and 'stderr' in the following: [2012-02-12T00:30:43.736Z] INFO: mo-docs/43194 on banana.local: buildDocs results (req_id=185edca2-2886-43dc-911c-fe41c09ec0f5, route=PutDocset, error=null, stderr="", cmd="make docs") ## 0.6.2 - Fix/guard against unintended inclusion of some files in npm published package due to ## 0.6.1 - Internal: starting jsstyle usage. - Internal: add .npmignore. Previous packages had reams of bunyan crud in them. ## 0.6.0 - Add 'pid' automatic log record field. ## 0.5.3 - Add 'client_req' (HTTP client request) standard formatting in `bunyan` CLI default output. - Improve `bunyan` CLI default output to include *all* log record keys. Unknown keys are either included in the first line parenthetical (if short) or in the indented subsequent block (if long or multiline). ## 0.5.2 - [issue #3] More type checking of `new Logger(...)` and `log.child(...)` options. - Start a test suite. ## 0.5.1 - [issue #2] Add guard on `JSON.stringify`ing of log records before emission. This will prevent `log.info` et al throwing on record fields that cannot be represented as JSON. An error will be printed on stderr and a clipped log record emitted with a 'bunyanMsg' key including error details. E.g.: bunyan: ERROR: could not stringify log record from /Users/trentm/tm/node-bunyan/examples/unstringifyable.js:12: TypeError: Converting circular structure to JSON { "name": "foo", "hostname": "banana.local", "bunyanMsg": "bunyan: ERROR: could not stringify log record from /Users/trentm/tm/node-bunyan/examples/unstringifyable.js:12: TypeError: Converting circular structure to JSON", ... Some timing shows this does effect log speed: $ node tools/timeguard.js # before Time try/catch-guard on JSON.stringify: - log.info: 0.07365ms per iteration $ node tools/timeguard.js # after Time try/catch-guard on JSON.stringify: - log.info: 0.07368ms per iteration ## 0.5.0 - Use 10/20/... instead of 1/2/... for level constant values. Ostensibly this allows for intermediary levels from the defined "trace/debug/..." set. However, that is discouraged. I'd need a strong user argument to add support for easily using alternative levels. Consider using a separate JSON field instead. - s/service/name/ for Logger name field. "service" is unnecessarily tied to usage for a service. No need to differ from log4j Logger "name". - Add `log.level(...)` and `log.levels(...)` API for changing logger stream levels. - Add `TRACE|DEBUG|INFO|WARN|ERROR|FATAL` level constants to exports. - Add `log.info(err)` special case for logging an `Error` instance. For example `log.info(new TypeError("boom")` will produce: ... "err": { "message": "boom", "name": "TypeError", "stack": "TypeError: boom\n at Object. ..." }, "msg": "boom", ... ## 0.4.0 - Add `new Logger({src: true})` config option to have a 'src' attribute be automatically added to log records with the log call source info. Example: "src": { "file": "/Users/trentm/tm/node-bunyan/examples/src.js", "line": 20, "func": "Wuzzle.woos" }, ## 0.3.0 - `log.child(options[, simple])` Added `simple` boolean arg. Set `true` to assert that options only add fields (no config changes). Results in a 10x speed increase in child creation. See "tools/timechild.js". On my Mac, "fast child" creation takes about 0.001ms. IOW, if your app is dishing 10,000 req/s, then creating a log child for each request will take about 1% of the request time. - `log.clone` -> `log.child` to better reflect the relationship: streams and serializers are inherited. Streams can't be removed as part of the child creation. The child doesn't own the parent's streams (so can't close them). - Clean up Logger creation. The goal here was to ensure `log.child` usage is fast. TODO: measure that. - Add `Logger.stdSerializers.err` serializer which is necessary to get good Error object logging with node 0.6 (where core Error object properties are non-enumerable). ## 0.2.0 - Spec'ing core/recommended log record fields. - Add `LOG_VERSION` to exports. - Improvements to request/response serializations. ## 0.1.0 First release.